돌아가기
이전글
다음글
PH 1
Tube Phono Preamplifier
CANOR PH 2.10 is an all-tube phono preamplifier for MM and MC cartridges.
It contains the minimum number of amplification steps required to apply purely passive corrections.
Product features
- ∎ it allows an exceptionally large variability of gain adjustment and selection of the correct values of resistances and capacitances for all types of transmissions.
- ∎ the MC cartridges are connected to the preamplifier input using
- high-quality Lundahl step-up transformer.
- ∎ to remove mechanical hum, the transformer core is vacuum impregnated and the entire transformer is encapsulated in a special anti-vibration compound.
- ∎ the primary and secondary windings of the transformer are separated by a shielding copper foil with a 50 % overlap, which prevents the penetration of interfering voltages from the network.
- ∎ the only high-quality polypropylene capacitors are used in the signal path. The RIAA correction is passive and consists only of quality polystyrene and polypropylene capacitors. The output capacitor is also of high quality (polypropylene foil).
- ∎ designed without overall feedback. The first and second amplification stages are made up of 12AX7, among which a subsonic filter is put. The third and fourth stages are made up of 12AT7.
